How Many Blocks Do I Need for a Block Wall? Count the Face, Not the Volume

A block wall is counted by face area, not by concrete volume.

The formula

Blocks = wall area (sq ft) × 1.125 for standard 8×8×16 in blocks with 3/8 in mortar joints (112.5 blocks per 100 sq ft).

A worked example: a 20 ft × 4 ft wall

  • Wall area: 20 × 4 = 80 sq ft
  • Blocks: 80 × 1.125 = 90 blocks net
  • Mortar: about 7 × 80 lb mortar bags
  • Grout: 28.9 cubic feet if every cell is filled

Mortar

One 80 lb bag of mortar lays up to 13 blocks, so 90 blocks need about 7 bags net — 8 with 10% waste (99 blocks).

Waste and breakage

Add 5–10% extra for cutting and breakage; corners, openings and transit are where blocks break.

Grout

Grout is about 0.321 cubic feet per filled cell, so 100 sq ft of fully grouted wall takes about 36.1 cubic feet (1.34 cubic yards) — but on a real wall, grout only the cells the design calls for, usually reinforced cells and cells around openings. This is a material estimate only, not structural design.

If you would rather not do the arithmetic by hand, run the same numbers through a block wall calculator — it gives block count, mortar bags and grout in one step.

Comments